How do you fix a turntable that won’t spin?

Has your record player stopped spinning? 

Have you checked the basics again and again?

You’ve also ensured it’s connected, that it is getting power, & that it’s turned on. 

Now, what else can you do? 

There are numerous reasons for a turntable that won’t spin, & most are genuinely simple to analyze and fix. 

First, try not to stress; you most likely won’t have to purchase another one.

Second, know that the belt drive players generally have glitch by getting slow steadily or halting completely.

With a belt-drive turntable, a motor turns a belt, which thus turns the platter.

At the point when a belt-drive turntable has spinning problems, it will have something to do with the belt.

The engine is completely connected with the turning platter with a direct drive turntable.

Direct drive turntables can, in some cases, appear as though they are spinning voluntarily.

At the point when they have spinning issues, it shows the motor has got some problem.

Why do Turntable Stop Spinning?

Turntables may quit spinning because of various reasons.

To precisely analyze the issue, it generally assists with having an idea of how a stereo functions.

It’s evident if you have a record player with a belt-drive turntable or one with direct drive turntable.

Thus, we’ve summarised some general points of the mechanism of record players to assist you with diagnosing and taking care of your specific issue without any delay.

1.Basic Troubleshoot: Arm Is Not Reset

If your turntable out of nowhere desists working, it’s just normal to expect the bad, mainly if something like this has never occurred.

While it’s anything but difficult to feel like something’s messed up inside the turntable & that your lovely device can never again be corrected, that is once in a while ever the case with a turntable that spins no more.

One potential issue could just be that the arm has not been reset if this is causing all the headaches, awesome! It’s effortless to fix.

This may happen when you have purchased a record player from a nearby sale or some other known seller, & it is neither easy to find on the internet, nor does it come with a user manual.

After playing, the spinning motion of the record player will not start altogether until it is reset, even if the arm is in a resting position to the right of the record.

Kindly lift the tonearm & push it toward the right-hand side if it is seen that it can’t be moved far enough.

To know that it has been reset, you ought to hear a clicking sound.

This is a shockingly regular issue that has left numerous clients of turntables pondering where they lacked precisely.

Please try to consistently reset the arm before you begin playing another record, to maintain a reasonable distance from this issue.

2.Issues with the Belt

If the turntable is a belt-drive model probably the belt has gotten free or disintegrated away.

The platter quits spinning at the point when the belt can’t stay in its right position or is damaged.

Consequently, it is essential to know as to where the issue lies initially.

If the belt is simply free or lose, you can fix this issue by repairing the belt or repositioning it.

Assuming, be that as it may, the belt has got ruined, you should purchase another one since it can no longer be possible for a belt-drive turntable to work appropriately without one.

3.The issue with the Direct Drive

It may be hard to find the issue with the direct-drive record players.

The inner component of the direct-drive motor can be an essential point causing the problem for a platter that has stopped spinning.

With regards to direct-drive turntables, there are various potential reasons why the turntable may be breaking down.

Dust and dirt stuck in the motor parts & shaft may cause many issues in the turntable.

A stuck platter or a defective on and off switch can make issues as well.

There is also the chance that the power to the motor is turned off, or the player just isn’t connected.

While it by and large isn’t too hard to even consider fixing these issues without anyone else, it may be hard to make sense of which parts need to change, & afterwards to locate the suitable new parts.

Routine upkeep is an ideal approach to lessen such issues.

Keeping the machine safe and free from dust is a decent careful step.

Regular maintenance and oiling too help prolong its life.

Instructions to Check & Fix the Belt

  • By analyzing the state of the belt, you can easily fix a player that won’t spin.
  • Kindly make sure if the belt is in the correct position.
  • Additionally, check the state of the belt and see if it is fading or needs a replacement.

Here are few approaches to determine if the player needs a belt substitution.

It will give you some indication that its time is near before the belt stops working.

Most remarkably, the turntable spins at a lousy speed, and the sound quality becomes poor.

Techniques to fix a turntable that won’t turn, by getting a new belt

  • To restart the spinning procedure & change the belt, you first need to buy a good belt.
  • The manual for the users has all the details related to the size, width, & thickness of the belt suitable for your model. In case you don’t have the manual, scan for it on the web.
  • Most manuals are available on the internet. If you can’t discover yours, check for the business that makes them & requests a manual, or directly inquire about the kind from the belt you need.
  • Start the replacement procedure when you have the belt.
  • When you want to start, unplug the turntable & remove the plastic covering securing the platter before.
  • Now, remove the platter from its position.
  • To do so, unscrew the C formed clip with any screwdriver that is perfect & make sure that you keep the clip safely for later use.
  • Flip it to its posterior, after the platter releases. You will see a round top on the inward side of the platter. Tenderly fix your belt and move it over the round inward top. Keep moving the belt gradually until it snaps in place. If the harmed belt is still set up, you have to detach it first.
  • Flip the platter over & place it on its normal position.
  • Stretch the belt from the access points & pull it over the drive motor.
  • Drive the platter into its place & append the C formed clip.
  • Finally, the belt and player are all set to rock!

DIRECT DRIVE VS BELT DRIVE

For many generations, a question has been confusing thinkers, philosophers, & audiophiles, & have been a subject of a lot of discussion for the last 50 or so years.

You may have seen that a few models are known as belt-drive turntables while others are known as direct-drive turntables even if you have been analyzing turntables, maybe hoping to buy your first turntable for a long time.

So what’s the distinction, & which is better?

Guys, we certainly don’t have all the responses, however, what we do have are the facts, experienced and assembled specially for you!

In the first place, to know how badly a turntable is known worldwide, we might want to state that belt-drive or direct-drive isn’t the last factor.

A few different components are also the key factors, for example, the nature of the tonearm, phono cartridge, quality of the turntable, & its basic structure.

The decision whether you mean to utilize it primarily for tuning in to records at home, where you’re playing, what your financial limit is, the performance of a turntable & your taste solely depends on you.

Along these lines, there’s no complete method to state one is better than the other, but let’s distinguish between each other.

What is a Belt-Drive Turntable?

  • A belt-drive turntable uses a belt to spin the turntable platter.
  • The motor is positioned separate to the platter, typically placed someplace off the side.
  • A belt, generally rubber, goes about as like a pulley underneath the platter, turning the platter & producing the power of the motor.
  • It has the lower torque than direct-drive turntables & to get up to max speed, and it usually takes a few minutes. For most people, this doesn’t generally make a difference as it’s still quicker than the cueing system to play a record.
  • Aside from switching in the range of 33 and 45 RPM, you can’t control the speed of a belt-drive turntable,
  • Less noise obstruction from the motor as it’s not directly under the platter. The belt further lessens noise obstruction by decreasing the vibrations from the engine & absorbing shocks.
  • While the platter takes more time to find a good speed, the belt drive turntables’ more massive platter seemingly keeps consistent playback speed.

Advantages:

  • Rubber absorbs shock. Produces better sound quality.
  • Sound of a record player’s seems cleaner.
  • Give importance to motor noise reduction.
  • Rubber also decreases any rough vibrations that come from the motor of the player.
  • Changing the turntable belt is quite inexpensive & easy.

Disadvantages:

  • Lower torque.
  • Less actual playback speed.
  • Elastic can break & wear down. 

What is a Direct Drive Turntable?

  • The motor is directly under the platter. These turntables generally find a good speed immediately.
  • Also, when you turn them off, the platter is free-spinning with no obstruction.
  • DJs commonly favour direct drive as the platter can find a good pace right away and speed quickly with no obstruction. They can undoubtedly spin the record in either course with no danger of harm to the turntable engine when it is off.
  • They give you speed control.
  • It is entirely simple to mix one tune into another with two turntables with the scope of speed alteration accessible on a direct drive table if you need to change the rhythm.
  • You don’t require to think about belt corruption or upkeep.
  • To switch it from 33 to 45, there isn’t usually an excellent method to change the speed.
  • The higher torque implies the platter is less delicate to outside forces like the stylus or your hand.
  • You can also undoubtedly turn the record in either direction without the danger of harming the motor.
  • Maintenance of speed consistency can be an issue with direct-drive turntables. These usually have a great deal of hardware that is continually making changes following the speed; in any case, this can influence the pitch.

Advantages:

  • Reliable.
  • No belt degradation.
  • sound is consistent
  • Quick start-up time is a great feature.
  • Durable design.

Disadvantages:

  • Lower playback quality.
  • High torque and consistency do suffer from motor vibration noises.
  • Unwanted vibrations observed.
  • Usually have to purchase shock absorbers.

At the end:

By the day’s end, your preference matter.

If you need top-notch sound, reliable playback and fascinating design, consider getting a belt-drive turntable. Assuming, be that as it may, you prefer durability & usability, go for the direct-drive turntable.

Sadly, you do have to hear them and make a choice!

Your music is distinguished by keeping the budget at check.

Leave a Comment