Connect a Turntable to a receiver without phono input

As most people quit tuning in to vinyl, many home sound system producers quit incorporating phono preamps in their receiver when CDs pretty much-substituted vinyl records during the ’90s. 

Manufacturers have again begun to incorporate phono preamps in their receivers as vinyl records have made a tremendous rebound in recent years.

The odds are that there is no phono preamp included if you have a collector that was new after 1995 or somewhere in the vicinity.

The player recreates a phono output signal.

To be imitated, this sign ought to be changed over into line-level one.

When it develops into the line-level sign it tends to be reproduced by a wide range of speakers, whether line-associated, remote, USB, and so forth.

We can here assist you with selecting the best receiver for a turntable so you can maximize your financial limit.

In case you have landed up with a turntable that doesn’t have a phono input, there is an approach to run it, which is discussed in this article.

With some subtle approach and rigorous research, we bring forward a few of the simple & best ways which not only help you to connect easily but also to become a master in this field.

Connect a turntable to a receiver w/o phono input-Best Methods

Connecting way 1:Normal Technique (Highly Recommended)

Connect the two output sound links originating from the turntable to the preamp’s inputs, but first, turn the power off to your turntable, receiver & preamp. 

Now, connect two links to the preamp’s outputs, one link to each output.

To the receiver’s line-level inputs, connect the opposite end of these links. The receiver inputs can be seen as TAPE, LINE, or AUX.

Before finalizing, on the preamplifier, connect the turntable’s ground wire to the grounding post.

Finally, turn the power on to your turntable, preamp & receiver.

Connecting way 2:

A receiver has a phono input & also has a built-in preamp; you are covered. No need for a standalone phono preamp or anything (Best)

To utilize a standalone preamp with a receiver that has a built-in preamp, as of now, is on the off chance.

You need to use a preamp of higher sonic execution & better quality than the one that is already in the receiver.

To build the sonic performance of vinyl playing sound system arrangement, upgrading to a higher quality preamp is a typical method that can be utilized.

Too little amplification to the signal is attained when the preamp that is incorporated with the receiver.

So including an independent preamp with higher amplification may be expected to get an appropriate music volume.

Connecting way 3: 

Connect the turntable to a recorder (Another best shot)

You should connect it to one of these LINE-level inputs, i.e., CD, DVD, TV, AUX, LINE, if your turntable has a built-in preamp. 

You should connect it to the PHONO input on the receiver if your turntable doesn’t have a built-in preamp. 

Or then again utilize an independent/standalone PHONO preamp that associates between the PHONO output on your turntable & one of the LINE-level inputs on your receiver, i.e., LINE, AUX, CD, and so on.

Leave a Comment